M6S

Land Pride’s GB2596 Grapple Bucket comes standard with the grapple claw and 4 high-strength cast tines. The jaw opening is 84″ and is controlled by dual 3″ cylinders. The bucket shell is manufactured from 3/16″ Grade 50 Steel and features a struck capacity of 1.0 to 1.18 cubic yards depending on model. (Not currently available in Canada)

Land Pride’s SBD35 Series 3-point Snow Blowers feature aggressive dual augers, manufactured from 3/8″ plate steel. The SBD35 is built to withstand the rigors of snow and ice removal in tough conditions. Beyond the dual 16″ augers, the SBD35 is manufactured with 1/4″ side plates and utilizes four paddles on the augers to direct snow into the 34″, 4-blade impeller. Skid shoes are available in rear-mount or side mount and are adjustable and replaceable. (Not currently available in Canada)

Land Pride’s RCF2696 Dual Spindle Rotary Cutter offers a smooth top design, and the 8′ width allows it to get through small openings into pastures and fields easily. It is available in both a 3-point and pull-type mount.

Make easy work of downed trees and limbs with an RG15 Series Root Grapple from Land Pride. In addition to storm clean-up, RG15s are ideal tools for land or site clearing by aiding in the removal of hard-to-handle materials such as logs, brush, stumps, rocks, and construction debris. Designed and manufactured with strength in mind, it remains light enough that the tractor loader lift capacity is not compromised.

Land Pride’s RG10 Series Root Grapples speed tasks like moving brush, logs, roots, rocks, concrete, and construction debris. The slight upturn in the lower tines make raking and grasping debris a manageable task without digging in; the wide tine spacing allows you to break roots from the ground when you want to dig in! With the universal quick-attach hitch, the RG10 quickly attaches to the tractor’s front end loader and is controlled by Land Pride’s family of 3rd Function Valves.

Land Pride’s familiar Parallel Arm Mower received a makeover and has been outfitted with a new mowing head. The FMP27 & FMP37 feature the parallel arm from our popular RCP27 & RCP37 with a Flail Head in place of the Rotary Cutter. The FMP is a good tool for mowing around ponds, over guardrails, or below grade while keeping the tractor on level ground and is easily attached and detached from the tractor’s Cat. 2 or 3 3-point hitch, freeing up the tractor for other uses. Contractors, municipalities, and landowners alike will benefit from the versatility of this unit!

Land Pride’s SBP16 Series Snow Blower is a 3-point, pull-behind model well suited for commercial, municipal, and campus snow removal applications. The inverted design allows operators to back up to obstacles like buildings or curbs, set the blower down, and drive away, offering the operator clear, forward visibility.

Not all 3-point products are quick-hitch adaptable, especially older units of any brand. With our adjustable top hook, Land Pride’s QH16 hitch has a better chance of fitting older 3-point attachments. Look for the Quick Hitch logo to denote applicable Land Pride products. Land Pride’s 3-Point Quick-Hitch is available for a Cat. 1 hitch allowing you to easily hook on to implements, some without ever leaving the tractor seat. Optional top link is required for implements that have a floating top link. This keeps the top link attached when going through ditches.

Designed for the power and productivity of the M7 Tractor, Land Pride’s new GBE30 is a workhorse for hay producers – the 108″ model will hold two round bales! The euro hitch on the GB30 mounts to a ¾” plate, fully welded to the bucket shell – combined with the 3/16″ shell, the hitch features nearly an inch of steel where it’s needed most! With additional features like a standard spill guard and quick release pins and storage stands on the grapple attachment, the GBE30 will quickly become the Hay Grapple that others are measured by.

Kubota by Land Pride: Pallet Forks have uses in a wide variety of applications from farming and ranching to construction sites, contractors, and material handling operations. They can quickly and conveniently turn your Skid Steer Loader or Compact Track Loader into a forklift to expand your material handling capability. The PFL46 and PFL56 models can all be adjusted from 12″ to 44″ width and feature a 1″ x 3″ chromoly steel carrier bar – now stronger and more resistant to fracturing and abrasion in high stress applications.

The OFM36 Series Offset Flail Mowers hydraulically offset to the right 49″ – the offset is measured from the center of the tractor to the drive belt cover. The offset allows for mowing along fences, buildings, or under trees.

When using the loader on a compact tractor, proper ballast is essential for safe operation. Whether you refer to this attachment as a ballast box, safety box, or weight box, its purpose is the same – to keep all four tractor tires in contact with the ground. To provide this needed counterweight, the Land Pride WB10 has a 600 lb. weight capacity and can hold 4.1 cubic ft. while the the WB15 has a 800 lb. weight capacity and can hold 5.8 cubic ft.

The OFM26 Series Offset Flail Mowers hydraulically offset to the right either 22″ or 49″ – the offset is measured from the center of the tractor to the drive belt cover. The offset allows for mowing along fences, buildings, or under trees.

The DH7100 Series Disc Harrows are intended for small farms with big needs but not a big budget. This Disc Harrow is heavy-duty and has been designed with the highest pounds-per-blade weight in the industry, allowing it to penetrate the toughest soil conditions. The optional rear finishing reel breaks down clods to level the soil, a leading industry option.

The RCB5710 Rotary Cutters are single wing mowers that are ideal for roadside mowing. The left-hand wing is replaced with a weight box on the RCB and the right-hand wing is replaced with a weight box on the RCBML models. This allows the operator to travel next to the road’s shoulder, remaining on more level ground. All the features you love from our 15-foot cutters are there too, in a 10-foot single wing model!

The RCB5715 is Land Pride’s new heavy-duty 15′ double-deck rotary cutter designed to make right-of-way and roadside maintenance a simple and efficient task and comes with 4 patented features. The RCB57 also features greaseless pivot points, endcap grease zerks, easy-off shields, and a patented sliding guard over the splitter gearbox, making maintenance easy to perform. The RCB5715 model features rephasing cylinders on the wings.

Land Pride’s RC5710 Rotary Cutters are single wing mowers that are ideal for roadside mowing. The left-hand wing is replaced with a weight box on the RC and the right-hand wing is replaced with a weight box on the RCL models. This allows the operator to travel next to the road’s shoulder, remaining on more level ground. All the features you love from our 15-foot cutters are there too, in a 10-foot single wing model!

Land Pride’s GB2084 is a light material Grapple Bucket specifically designed to be lighter (997 lbs.) than our larger GB25 to better match the capabilities of the Kubota M5.

Land Pride’s GR1525 Stump Grinder turns large stumps into small chips and has uses and applications with contractors, landscapers and forestry departments.

Land Pride’s MPS26 Multi-Purpose Seeder (formerly called the NTS26) offers fluted seed cups and cast, notched rear roller. A sprocket-driven gearbox on the main seed box eliminates switching chains and sprockets.

The RC5715 is Land Pride’s new heavy-duty 15′ double-deck rotary cutter designed to make right-of-way and roadside maintenance a simple and efficient task and comes with 4 patented features. The RC57 also features greaseless pivot points, endcap grease zerks, easy-off shields, and a patented sliding guard over the splitter gearbox, making maintenance easy to perform.

Land Pride’s Hydraulic Parallel Arm Rotary Cutters provide a safe and efficient method for cutting ditch banks, pond dams, and other sloping areas adjacent to rights-of-way, lakes, ponds, or streams. They also work well for maintaining snowmobile paths or wooded lanes and roads.

The RCP’s self-contained hydraulic system requires only one set of hydraulic remotes on the tractor and is available in a Float or No-Float option. Also available is an option utilizing the tractor’s hydraulic system and requires 4 remotes. The optional gauge wheels allow the deck to glide over undulations and rolling terrain without the operator having to constantly monitor ground conditions.

Land Pride’s RC4710 / RCM4710 is a 10′ offset version of our RC4715 Rotary Cutter.

Land Pride’s AG15 Series entry level Arena Graders are ideal for hobbyists and enthusiasts. The Cat 1 hitch is quick hitch compatible and ties into a 2″ x 2″ square tube frame. The end tubes are 2″ x 3″. The S-tines feature replaceable tips. Behind the two rows of S-tines is a five-position leveling bar to smooth the soil. The job is
finished with either a pipe or mesh roller to break clods and fluff the soil. The working depth is 4″ and is set by a simple ratchet handle, a Land Pride exclusive feature.

Land Pride’s CB10 Series Combo Bucket is commonly referred to as a 4-n-1 – to dig, drag, doze, and clamp – all in one tool! They feature a quick-attach hitch, 3 hardened, weld-on cutting edges, 1″ greaseable hinge point pins, and 3,000 PSI.

The RC4715 (RCM4715) is a heavy-duty flex-wing rotary cutter with a 4″ cutting capacity and 15′ cutting width designed to make pasture and roadside maintenance a simple and efficient task. The unit comes with ease of maintenance features that you’ve come to expect from Land Pride like greaseless pivot points, endcap grease zerks, easy-off shields and a patented sliding guard over the splitter gearbox, making maintenance easy to perform.

Land Pride’s RC3715 (RCM3715) is identical to the RC3712, simply 3 feet wider. The tire offering on the RC3715 is expanded to 4, 6, or 8 tires in 4 sizes, including our new 26″ laminated tire. Deck rings are available as well as fold options that allow for narrow transport or independent control of the wings.

Land Pride’s RC3712 (RCM3712) Flex-Wing Rotary Cutter features a 3″ cutting capacity with a cut height of 1.5″ to 14″. The input driveline is a constant-velocity, Cat. 6 with Cat. 4 wing drivelines. The cutter is available for 540 or 1000 RPM tractors, with 4 or 6 tires in 3 sizes, and 5 hitch options. Standard equipment include wing transport locks, transportation lights, and replaceable skid shoes.

Rounding out our line of Quick Hitches is the Land Pride QH30 for Category 3 Implements. The QH30 features a non-adjustable top link, optional floating top link, and automatic locks on the lower lugs with quick release handles. It is rated for Cat. 3 tractors up to 250 HP. Implement dealers, rental yards, nurseries, municipalities, implement manufacturers, landscape contractors, professional turf managers, farmers, ranchers, and large feedlot operations can increase productivity by using the Land Pride Quick Hitch.

Land Pride’s FM25 Series Flail Mowers are built for use in vineyards, orchards, and recreation areas. Sturdy and compact, the Land Pride FM25 has an electronically balanced rotor mounted on spherical roller bearings. The rotor is driven by a three section Powerband; spring-loaded, self-indicating belt-tensioning system makes it easy to tension belts for longer life. Three different blade options make quick work of grass, grapevine shoots, saplings, and tree prunings. (PowerBand is a Registered Trademark of the Gates Corporation.)

Kubota by Land Pride: The AB Series Angle Brooms are ideal for construction site cleanup, road maintenance, light snow removal on paved surfaces, and cart path maintenance. Options include poly, wire or blended poly brush with hydraulic or manual angle adjusters. Only available through Kubota Dealers.

Kubota by Land Pride: The SRB15 Series Rock Buckets have uses and applications in farming, ranching, construction sites, nurseries, campuses, theme parks, salvage operations, warehouses, lumber yards, and large or small retail outlets. They have the capability of quickly and conveniently turning your skid steer loader or tractor loader equipped with a universal quick attach mounting system into a bucket expanding your material handling capability. Only available through Kubota Dealers.

Kubota by Land Pride: The SGR15 Series Rock Grapples are designed to do the dirty work, moving volumes of material quickly and efficiently. The grapples feature dual hydraulic cylinders that can close at various gaps to handle irregular shapes. The bucket is designed with 3″ spacing between the teeth to allow small rocks, soil, and other debris to be sifted, leaving the larger material locked in its jaws. Only available through Kubota Dealers.

Kubota by Land Pride: SGC20 Series Claw Grapples make quick work of large jobs, and can be used to rake, dig and move rocks, trees, brush, and construction debris without picking up dirt. The compact design minimizes weight while preserving lift capacity. These grapples are made from AR400 high tensile strength material. Only available through Kubota Dealers.

The STB15 Series Snow Trip Blades are designed to fit tractor loaders. The 15 Series features a 27″ curved moldboard. Both models feature dual trip springs and abrasion resistant AR400 skid shoes. Hydraulic angling options are available on both units as well and both have safety orange edge markers as standard equipment. (STB1596 not currently available in Canada)

Land Pride’s FC10 is a single row 3-point Cat. 1 C-tine Field Cultivator for use by hobby farmers or gardeners. It features 6 spring steel C-tines, reversible and replaceable heat-treated tips, adjustable row spacing, and durable formed steel frame. Working width is 48″ up to 57″.

Land Pride’s heavy-duty 3-point RS20 Ripper Shanks are perfect for fracturing hardpan compacted over years of use. The dual-shank RS20 are capable of ripping the soil 24″-27″ deep. The RS20 features high carbon 1.25″ heat treated steel shank, heat-treated replaceable tips, shear pin protection, and Cat 1 and 2 3-point hitch, and has adjustable row spacing.

Land Pride’s heavy-duty 3-point RS15 Ripper Shanks are perfect for fracturing hardpan compacted over years of use. The single-shank RS15 is capable of ripping the soil 24″-27″ deep, and features high carbon 1.25″ heat treated steel shank, heat-treated replaceable tips, shear pin protection, and Cat 1 and 2 3-point hitch.

Land Pride’s LR37 Series Landscape Rakes are perfectly suited for housing construction, road reconditioning, run-off control projects, and reforestation sites to spread rock, move debris, seed preparation, final soil surface preparation, and reshaping soil and/or aggregate profile.

Land Pride’s BSR20 Series are 3-Point Cat 2 Bale Spears for moving large, heavy, round or square bales. They feature a 4″ x 4″ square tube for strong single-beam construction, 3/8″ plate steel for the top link, 1/2″ lower 3-point lugs, and 49″ forged steel spears (44″ usable). Our BSR20 is 45″ wide with two spears and a lifting capacity of 3,000 lbs.

Land Pride’s BSR10 is a 3-Point Cat I or Cat II Bale Spear intended for moving bales up to 1,800 lbs. It features a single, forged 49″ steel spear with a 44″ usable length mounted to a 3″ x 3″ tube frame. To keep the bale from rolling, the BSR10 also has two replaceable 19″ stabilizer spikes.

Land Pride’s single wing, 14-foot RC4614 / RCM4614 Rotary Cutter, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

Land Pride’s RC4620 (RCM4620) 20′ Rotary Cutter complements our broad line of flex-wing cutters. This cutter is also available in a single wing, 14-foot and 1000 RPM models, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

Land Pride’s BB35 Series Box Blades are a heavier 3-point Box Blade to complement our popular line of Box Blades offered by Land Pride. The beefy 3/8″ x 4″ x 4″ main-frame tube and 3/8″ end panels makes our 35 Series Fixed Bar Box Scraper ideal for construction sites and commercial operations or for use by counties and municipalities. Two welded channel braces extend from front to rear of the box plus welded gussets between the side panels and 23″ roll-formed moldboard provide exceptional strength under heavy loads. The durable BB35 is comfortable dragging or back-filling.

Land Pride’s End Wheel No-Till Drills are ideal for seeding in a wide variety of applications from pasture renovation to utility reclamation or food plots to food production. They are a great combination between the productivity of a large drill and the versatility of a compact one. Both End Wheel Drill models feature large end wheels designed for unmatched ground gauging in rugged terrain. In addition, the in-line end wheels minimize side loading on contours and hills, dramatically extending the life of the no-till openers.Whether the seed is small, large, or fragile, this time-proven metering system will deliver the rate you choose, evenly and gently.

Land Pride’s Bale Spears are available in two mounts, Universal Skid Plate and Euro, with “E” in the model name to denote the latter. These three spear models are available with an assortment of spear options and combinations of lengths. Usable spear length is 4″ shorter. Stabilizer extensions with spikes are available. Frames are constructed from 3″ x 3″ square tubes with a lifting capacity rated at up to 3,000 lbs.

Land Pride’s DB2660 (DBM2660) Ditch Bank Rotary Cutter boasts a number of features that will make mowing ditch banks, pond dams, or other hard to reach inclines fast, easy, and efficient. Built for either 540 or 1000 RPM tractors, the DB2660 features a 58″ cutting width, 1″ cutting diameter, and 32″ cutting reach. The 1/2″ by 4″ blades rotate clockwise at 15,000 fpm, directing debris away from the tractor. Minimum cutting height is dictated by the tractor’s 3-pt height.

Land Pride’s SA20 is a lighter planetary drive Post Hole Digger ideal for land owners, landscapers, hobby farmers, or contractors. The Land Pride SA20 digs holes from 9″ to 36″ in diameter and up to 48″ deep or deeper with available auger extensions. With 10 different augers available- 7 double flight augers from 9″ to 36″ and 3 tree augers in 24″, 30″, and 36″ sizes – the SA20 is a versatile and dependable tool.

Land Pride’s SSP2510 Snow Pushers fit your skid steer or tractor loader and offers a 3/16″ thick, 36″ high moldboard, and 5/16″ side panels. The AR400 skid shoes are adjustable, reversible, and replaceable. Land Pride Snow Pushers are designed to push snow straight ahead without leaving windrows or damaging the pavement below. The SSP mounts using the universal Quick-Attach plate and features an 8″ rubber wear edge. The rubber edge means Land Pride Snow Pushers eliminate damage to the pavement or lot striping on most surfaces while removing slush and snow.

Land Pride’s RC2515, a 15′ version of our popular 12′ medium-duty Rotary Cutter, is an economical solution for general grass cutting needs. The Land Pride gearboxes feature a 1-5/8″ output shaft and stout lower bearings. The gearboxes are driven by a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection on all three. The ride is cushioned by a deck-mounted spring and can be enhanced with optional 29″ used aircraft tires — either 4 or 6 per cutter.

The Land Pride RB37 Series Rear Blades with 3-Way Positions (blade angle, blade tilt, and blade offset) are built tough from the ground up for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, property owner lanes, and roadways. They are excellent for snow removal in pulling or push-blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and silage pit operations.

Let Land Pride’s SGS15 Series Skeleton Grapples do the digging for you by removing roots, brush, and other timber or debris. The SGS15 offers 5-1/2″ spacing between the teeth, smaller debris is sifted. Dual hydraulic cylinders can close at various gaps to handle irregular shapes, and serrated teeth make this grapple a workhorse in storm clean up and land clearing operations.

Land Pride’s SGC15 Series Claw Grapples make quick work of large jobs, and can be used to rake, dig, and move rocks, trees, brush, and construction debris without picking up dirt. The compact design minimizes weight while preserving lift capacity.

The heavy duty RC5020 and RCM5020 Series Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on gently sloping or slightly contoured right of ways, roadsides, pastures, setaside acres, or for residue in row crop fields. The 20′ cutting width, 2″ to 14″ cutting height and ability to cut weeds and brush up to 3″ in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 90-250 hp tractors. They also offer various safety guard selections making them an excellent choice for state and municipal mowing applications.

Land Pride’s LR26 Series Landscape Rakes are ideal for spreading rock, moving debris, preparing seed beds, and reshaping soil and/or aggregate profile. LR26 Rakes are available in 84″ (LR2684) and 96″ (LR2696) widths. These Landscape Rakes offer seven forward angles up to 45 degrees. The LR26 is designed for tractors up to 60 HP and features a quick-hitch compatible Cat. 1 Hitch and can be ordered with an optional hydraulic angling kit.

The Land Pride BS10 & BS20 Series Bale Spears can be attached to machines fitted with a Skid Steer adapter mounting plate, while the BSE20 Series Bale Spears can be attached to machines fitted with a Euro style adapter mounting plate. Bales can be pushed onto side dump trailers with single and double spear units. Single spear units take less force to push the spear into the bale and bales of all sizes won’t shift positions as easily while pushing the spear into the bale. Double spear units have twice the lifting capacity. The two spears spaced apart also miss the soft inner core of a bale and probe the harder outer area allowing the spears to lift a heavier bale.

Land Pride’s RCF3696 / RCFM3696 is a heavy-duty dual spindle cutter with a 3″ cut capacity. This rotary cutter is made for pasture maintenance, roadside mowing, and land clearing in reclamation projects. The gearboxes are protected from damage by the slip clutch on the main driveline and impact absorbing flex couplers on the connecting drivelines. The features on this unit add up to a bigger, better cutter.

The RCF3010 / RCFM3010 Dual-Spindle Rotary Cutter from Land Pride is the perfect medium-duty cutter for pastures and roadside applications. Available in 3-point, semi-mount or pull-type, the RCF30 features a 2.5″ cutting capacity and 1/4″ side skirts. Plus, every RCF3010 comes with the rugged dependability that Land Pride Rotary Cutters are known for.

Land Pride’s RCF3096 Series Dual-Spindle Rotary Cutter from Land Pride is the perfect medium-duty cutter for pastures and roadside applications. Available in 3-point, semi-mount or pull-type, the RCF3096 features a 2.5″ cutting capacity and 1/4″ side skirts.

Land Pride’s RCF3610 / RCFM3610 dual-spindle rotary cutter is an updated, flat-top version of the original RCR35. With larger gear boxes, larger cutting capacity, and a deeper deck, the RCF3610 is the ideal dual-spindle cutter for narrow areas in pastures, along roadsides, or in tree groves.

Land Pride’s HD35 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6″ to 24″ in diameter. They are available with a bolt-on mount for mounting to the side of a bucket, on a tractor front-end loader, or with a boom for mounting to a category 1 or 2 three-point hitch. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the three-point mounted post hole diggers.

The Land Pride HD25 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6″ to 24″ in diameter. They are available with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category 1 or 2 three-point hitch. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the three-point mounted post hole diggers.

Land Pride’s AFM4522 All Flex Mower is a commercial mower that can easily mow over 10 acres per hour. Contractors can make quick work of turf areas like parks, sports complexes, and sod farms. The high blade tip speed will produce a quality cut in Bermuda, fescue, or rye turf grasses. The narrow transport width allows access to area with east, easily fitting through any 10-foot gate.

Land Pride’s AFM4216 provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates. It offers independent deck flotation and zero turning radius thanks to the sleek frame design. When transporting the AFM4216 from one mowing site to another the hydraulic wing cylinders will easily lift the wing decks for a 8’5″ transport width — especially critical on a public streets or rights-of-way. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.

The Land Pride AFM4214 All Flex Grooming Mower provides users with an excellent cut quality on groomed areas such as sports fields, theme parks, fairways, turf farms, and large estates. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius thanks to the sleek frame design. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.

Land Pride’s RC5014 / RCM5014– Land Pride’s largest offset flex-wing rotary cutter — makes quick work of roadsides 14-feet at a time. The offset allows the operator to travel next to the roadway in the same direction of travel as the traffic, increasing safety for the operator. The cutter features a heavy-duty Cat 6 driveline, heavy duty gearboxes, and a high blade tip speed for a clean, uniform cut in most highway mowing operations.

The RTA3576 is Land Pride’s toughest tiller, built to withstand the rigors of commercial jobs. The 35 Series Tiller is designed to go all day, day after day, in the most demanding jobs. With a 19″ rotor swing diameter, this tiller can turn over a bunch of dirt without much getting in its way and is ideal for landscaping, nurseries, and commercial gardening applications. The Cat. 4 slip-clutch driveline and 75 HP gearbox keeps the power coming in the toughest conditions. The spring loaded rear deflector keeps the tailgate on the ground to level and keeps larger debris in for more pulverizing action.

RTR2570 Land Pride Tillers have applications in landscaping, nurseries, gardens, and medium-duty commercial use. Their reverse-tilling action makes them ideal for seedbed or planting preparation and their 70″ width and #100 drive chain make them perfect for your commercial operation. The Land Pride RTR25, like all Land Pride reverse rotation tillers, achieves greater depth of penetration, moving and pulverizing more soil in the process, while burying residue as opposed to leaving it on top. Rocky soils are not good for reverse tilling.

Ideal for landscapers and gardeners, the Land Pride RTA2572 Forward Rotation Rotary Tiller prepares seedbeds for gardening or lawn planting. Rugged and dependable, the RTA2572 has uses in landscaping operations, nurseries, large gardens, and commercial operations.
Standard Land Pride features like a stamped chain cover, stamped rear deflector, heavy-duty driveline and storage stand, all come together in the name of quality and dependability. A parking stand provides easy hook-up and storage. Optional down pressure springs apply pressure on the rear deflector for tougher leveling conditions.

The Land Pride RTR2072 Rotary Tiller is just right for home gardening, landscape work, vegetable farming, food plot maintenance, and light commercial use. The RTR2072 features a reverse tilling action for tough conditions and turns up hard packed ground, leaving a perfect seedbed for gardens and grass. The reverse action “sucks” the tiller into the ground, which prohibits the tiller from “walking” on hard ground. It also incorporates spring loaded “sifting” rods behind the tines to help bury large rocks and debris. The reverse action of the rotor brings material up and over the top. Rocks and vegetation cannot get through the sifting rods so they fall first. Soil continues to get sifted before it falls, building a layer of large to small dirt clods burying the rocks and vegetation.

The RTA2072 Rotary Tillers offer a forward-rotating tilling action that can work in many types of ground conditions and turns up hard-packed ground, leaving a perfect seedbed for gardens or grass. This model fits a wide range of tractor owners, from landscapers or city and park maintenance operations to golf course superintendents. Standard Land Pride features like a stamped chain cover, adjustable rear deflector, heavy-duty driveline and parking stand, all come together in the name of quality and dependability.

Land Pride’s RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger flex-wing cutters. The 12′ width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for light agricultural and municipal grass maintenance.

The Land Pride RCF3684 Rotary Cutter is a brute among single-spindle cutters. It features a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4″ in diameter and has a cutting height range of 2″ to 12″. The RCF3684 features a smooth top design for easy cleaning, and all-welded deck for added strength, and a floating top hitch for a clean, even cut.

The Land Pride RCF36 Series Rotary Cutter is a brute capable of clearing heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4″ in diameter. The RCF36 has a smooth top design and offers a 2″ to 12″ cutting height range.

Land Pride’s RCF2784 Rotary Cutters are heavy-duty smooth top versions of the RCR26 Series. The 84″ width helps you tackle small trees up to 3″ in diameter, as well as grass, weeds, crops and brush.

The RCF27 Series Rotary Cutters is a smooth top version of our RCR26 Series, offering the same great cut and ideal for grass, weeds, crops, brush and small trees up to 3 inches in diameter. These units come equipped standard with a 3/16″ thick heavy-duty stump jumper and replaceable bolt-on skid shoes. Optional shields are available for the front and rear.

Land Pride’s standard utility duty RCR25 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right-of ways, pastures, set-aside-acres, and row crop fields. Their 2″ to 12″ cutting height and ability to cut weeds and brush up to 1″ diameter make them well suited for these applications.

The Land Pride smooth-top RCF2084 Rotary Cutter will quickly tackle pastures and light brush with its 84″ cutting width and 2″ cutting capacity. The floating top link permits the deck to follow the terrain for an even cut. This cutter has a Category I and II 3-Point hitch that is Quick Hitch adaptable. The standard ASAE Category 4 driveline is offered with 2-plate slip-clutch to protect your cutter investment.

Land Pride’s RCF20 Series features a smooth top for easier cleaning and a floating top link for following ground undulations in grass, weeds, and light brush up to 2″ in diameter. The RCF20 is ideal for rural acreage or farm grass maintenance. These cutters have a Category 1 3-Point hitch that are Quick Hitch adaptable. The standard ASAE Category 3 driveline is offered with either shear bolt or slip-clutch protection and the tailwheel is offered laminated or solid rubber.

Land Pride’s RCD18 Series is a smooth-top, offset cutter that performs best in grass-only applications. Being dual spindle, the cutter is shorter in length than single spindle 84″ cutters; the reduced length allows for better maneuverability in tight spaces. The 10″ offset makes the RCD1884 a good solution for applications that require cutting close to buildings, fences, or other obstacles that might be found in orchards, parks, or rights-of-way.

Land Pride’s RCR1884 Series Rotary Cutter offers an 84″ cutting width to rapidly tackle material up to 2″ in diameter for light maintenance around the farm, the pond or empty lots in the city. The cutter has a Category 1 and Category 2 three-point hitch and is Quick Hitch compatible. It is offered with a standard ASAE Category 4 driveline with slip-clutch protection and a single or dual rear laminated tailwheel.

Land Pride’s RCR18 Series Rotary Cutters are ideal for light-duty maintenance around the farm, on gently slopes, or slightly contoured right-of-ways. A fully welded deck adds additional strength while the floating 3-point permits the deck to hug the terrain for a quality cut. The cutters have a category I three-point hitch and are Quick Hitch adaptable. They are offered with a standard ASAE Category 3 driveline with either shear bolt or slip-clutch protection and either a laminated or solid rubber tailwheel.

For small acreage owners looking for a heavier cutter, Land Pride offers the RCR15 Series. It features a 2″ cutting capacity, a high blade tip speed, and larger gearbox than the RCR12. Ideal for maintenance of lanes, pastures, and other rough-cut areas.

The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1″ cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match
for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24″ stump jumper.

Land Pride’s APS15 Series All-Purpose Seeders are excellent combination planting and cultivation tools for golf courses, school systems, municipalities, rental yards, construction companies, sports fields, and college campuses. Their narrower widths make them effective in seeding applications on grassy medians, or rights-of-way adjacent to sidewalks, community parks, sporting facilities, and golf courses. Unlike wider seeder models, these units will do a more effective job of planting in areas where undulations, moguls, and depressions are prevalent.

Land Pride SB2584 Series Snow Blowers are available in 84″ width and are 3-Point rear mounted. These Snow Blowers are primarily designed to remove snow from parking lots, walking paths, lanes, and driveways in rural, municipal or commercial applications. Optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. With optional hydraulic or electric chute and deflector shield this unit is built for the long haul! The 84″ width, 16″ auger, and 24″ impeller make short work of the largest snow removal tasks. (Not currently available in Canada)

Land Pride’s SB1574 Series Snow Blowers are perfect for snow removal on parking lots, walking paths, lanes, and driveways in rural, municipal and commercial applications. Available in 74″ widths, these units make quick work of your snow chores. With optional hydraulic or electric chute and deflector shield, optional front cutting edge, and optional skid shoes, this unit is built for the work at hand! The 16″ auger and 24″ impeller make short work of the biggest snow removal tasks. (Not currently available in Canada)

Land Pride’s SB10 Series Snow Blowers remove snow from driveways, parking lots, and sidewalks. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as needed. The optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. (Not currently available in Canada)

Land Pride’s RBT55120 Series 3-Way Hydraulic Rear Blade are built tough from the ground up. Make manual or hydraulic adjustments; angle, tilt, or offset to meet the demands of heavy-duty jobs. The blade, with its reversible cutting edge, can be angled left or right up to 45 degrees, the ends can be tilted up or down by as much as 15 degrees, and the whole blade can be offset to the left or right by as much as 33″. The blade can also be rotated 180 degrees for blading in reverse with the same angling, tilting and offset capabilities. A retractable parking stand is included to accommodate easier blade removal, storage and reattachment.

Land Pride’s RBT45 Series 3-Way Hydraulic Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning, and all-around farm use. Make changes on the go with hydraulics at all three positions and use your time more efficiently. Available options include single or double hydraulic gauge wheels, side plates for holding dirt in, and skid shoes for blade protection.

Land Pride’s RBT40 Series 3-Way Hydraulic Rear Blades are built tough from the ground up for applications ranging from landscaping, construction, snow removal, and feedlot cleaning. Designed to handle 100 HP tractors, this blade is also ideal for ditching, road grading and all-around farm use. By using hydraulics at all three positions, time can be utilized more efficiently by making changes on the go. Optional skid shoes and side plates are available for more precise results.

Land Pride’s RBT35 Series Rear Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.

The Land Pride RB26 Series Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations. They excel in snow removal in either the pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations.Optional hydraulic angling kits are available.

Land Pride’s PTS Series spin type Broadcast Spreaders offer a pull type hitch and are ground wheel driven with simple gearbox disengagement for transport. The spreaders are capable of spreading seed, sand, salt, top dressings, prilled/granular fertilizer, and many other types of granular materials. The spread rate capability and range of hopper capacities make the PTS Series Spreaders well suited for applications on farms, golf courses, food plots, park systems, athletic fields, and campuses. These units are great for control of snow and ice in commercial or small municipal applications.

Land Pride’s PFS Series pendulum-type broadcast spreaders are capable of spreading seed, top dressings, prilled/granular fertilizer, lime, and iron at delivery rates ranging from 44 to 890 lbs. per acre with a spreading width of 20′ to 46′. Optional spouts are available for narrow spreading, vineyard spreading between rows, and vineyards/orchards spreading on the rows only.

Land Pride’s line of rotary/spin type Broadcast Spreaders are capable of spreading seed, sand, salt, top dressings, lime, prilled/granular fertilizer, and most all other types of granular materials. The spread rate, capability, and range of hopper capacities make FSP Spreaders well suited for applications on farms, golf courses, food plots, park systems, athletic fields, campuses, and smaller municipal or commercial operations. They excel at spreading sand or salt for control of ice and snow.

The SP30 Series Soil Pulverizers loosen, pulverize, and level packed or encrusted soils in preparation for seeding or laying of new sod. Land Pride SP30 Soil Pulverizers are well suited for landscapers, rental yards, construction contractors, and professional turf managers. Applications include golf courses, housing developments, athletic fields, nurseries, sod farms, transportation right-of-ways, and park systems.

The SP20 Series Soil Pulverizers loosen, pulverize, and level packed or encrusted soils in preparation for seeding or laying of new sod and are well suited for use by landscapers, rental yards, construction contractors, and professional turf managers. Applications include golf courses, housing developments, athletic fields, nurseries, sod farms, transportation right-of-ways, and park systems.

Land Pride’s PR16 Series Powered Rakes are a multi-functional seedbed or soil surface preparation tool for landscapers and turf care professionals, capable of grading, leveling, shaping, cultivating, renovating and pulverizing various types of soil surfaces. They are also capable of raking or windrowing soil, rocks, and construction site debris.

The Land Pride PD35 Series Post Hole Digger is designed to meet the industrial duty applications of landscapers, construction companies, nurseries, ranchers, and farmers. The PD35 is designed for Category 1 or 2 three-point attachment and offers a 48″ auger length and 9″, 12″, 15″, 18″ or 24″ auger flights with cast steel fishtail tips.

Land Pride’s PFL Series Pallet Forks quickly and conveniently turn your Skid Steer loader – or Tractor loader equipped with a skid steer adapter plate – into a forklift to expand your material handling capability.

The Land Pride PF10 Series Bucket Mounted Pallet Forks have uses in farming, ranching, construction sites, nurseries, campuses, theme parks, salvage operations, warehouses, lumber yards, large or small retail outlets, and many other applications. They have the capability of turning your tractor or skid steer bucket loader into a forklift for expanded material handling capabilities. With capacities of 1000 lb. for the PF10 Series or 2000 lb. for the PF20 , you’ll find that the Land Pride Pallet Forks will save you time and money and make material handling jobs a great deal easier.

Land Pride’s QH20 3-Point Quick-Hitch is available for a Cat. 2 hitch allowing you to easily hook on to implements, some without ever leaving the tractor seat. Implement dealers, rental yards, implement manufacturers, landscape contractors, professional turf managers, nurseries, municipalities, and large feedlot operations can increase productivity by using the Land Pride QH20 Quick-Hitch.

Land Pride’s FDR25 Series Grooming Mowers offer the same 3-blade system and floating hitch as the FDR16 and provide professional results for large acreage properties and municipalities. Their frame-over-deck design supports the deck, minimizing flex and provides superb cutting performance in turf-grass applications.

Land Pride’s GS25 Series Grading Scrapers are ideal for renovating gravel driveways and roads, leveling construction and turf sites, and cleaning barns and chicken coops. Grading Scrapers have uses in applications such as landscaping operations, farms, ranches, construction sites, hunting camps, logging sites, mining operations, large estates, sod farms, and municipal and county rural road maintenance facilities. These Grading Scrapers are extra user-friendly and a low cost alternative for road grading applications.

Land Pride’s AFM4211 All-Flex Mower provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as fairways, parks, schoolyards, and sports fields. The AFM4211 is available with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. The contour following capability, highly productive 11′ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.

Land Pride BB45 Series Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, are ideal for moving large quantities of material, leveling, and finish grading. Scrapers with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade in to lower areas.

Land Pride’s 606NT is a 6′ Pull-type No-Till Drill and features an end-wheel design that reduces side-loading on openers when operated on contours and curves, eliminating premature opener wear. This time-proven design allows the 606NT to stay on side hills and maintain accuracy going over hills and through valleys. Other features like heavy-duty coulters, calibration crank, central grease bank, lock-out hubs for transport, and optional weight brackets create a system designed for long-term dependability and productivity in a broad range of seeding applications.

Similar to the 3P500, the Land Pride 3P600 is a 3-Point Min-Till drill. This 6′ unit is designed to get into smaller spaces like wooded areas, orchards, or vineyards. It excels when seeding into fully prepared and minimum tillage plots. End users can add the optional small seeds box and plant two different seeds simultaneously. Like the 3P500, the 3P600 is ground driven and features 4-speed gearboxes for fast seed rate changes. It is equipped with rugged 00 Series openers to provide accurate and consistent seed placement.

Land Pride’s DRG Series Drag Harrows are highly versatile in their design and performance. A harrow mounted on the drag bar with tines facing down and forward will deliver aggressive soil stirring action and deep penetration. Turn the harrow 180 degrees with tines facing down and to the rear and you’ll get less penetration with lighter cultivating action. Flip the harrow over with tines facing up and you get almost no cultivating action.

The DT55 / DTM55 Powered Ditcher is a versatile tool to use in many water control applications. Cleaning water ditches along roadsides or in farm fields to drain standing water away from crops, the DT55 makes it simple. The 20″ impeller leaves a clean and sculptured trough to keep water flowing freely from unwanted areas. With the optional Material Control Chute in place, dirt can be placed just next to the machine or thrown many feet away to reshape terraces. Other options include depth-control gauge wheel and ripper shank.

Land Pride’s DH35 Series pull-type Disc Harrows are perfectly matched for seed bed preparation, soil pulverization, and tillage on smaller farms, ranches, construction sites, race tracks, rodeo grounds, nurseries, reclamation sites, and sod farms. Economy-conscious customers will find them more than equal to just about any soil cultivation task you can throw at them.

Land Pride’s DH25 Series Disc Harrows breakup and redistribute the soil surface in preparation of seedbed and field planting operations. Disc gangs can be ordered with smooth or notched disc gang arrays for lighter or more aggressive applications and this series does offer 20″ diameter or larger 22″ diameter discs to meet specific customer needs. The DH25 Series Disc Harrows have applications in commercial landscaping, construction, farms, ranches, and municipal maintenance programs, and can be used in conjunction with Land Pride’s seeding package — Seed Bed Roller, Electric Spin Spreader, and Drag Harrow.

Land Pride’s DH15 Series Disc Harrows break up the ground with their heavy-duty frames and heat treated disc blades, making them ideal for landscapers and small acreage farmers. Disc gangs are notched for aggressive applications such as commercial landscaping, nurseries, and large gardens to small farms and municipal beautification programs.

The HR35 Series Retractable Box Scrapers meet dirt moving and soil contouring needs of landscapers, contractors, nurseries, sod growers, farmers, ranchers and municipalities. Soil contouring productivity is dramatically increased with utilization of the hydraulically controlled retractable scarifier. The front blade mounted on the moldboard is ideal for soil redistribution and soil leveling. A second blade mounted on the hinged rear gate further enhances the ability of the Box Scraper to redistribute and level soil. Both the front and rear blades are replaceable and can be flipped over to extend blade life.

Land Pride’s HR2572 Box Scrapers are ideal for ripping, leveling, finish grading, and backfilling applications at commercial feedlots, outdoor arenas, building sites, and maintenance operations on farm and ranch lanes or roadways or constructions sites. The hydraulic retractable ripping shanks in combination with the 21″ double-thick moldboard design make these units highly productive for construction projects.

Land Pride’s CA25 Series Core Aerators are designed to relieve soil compaction and allow air circulation in grassy surfaces such as lawns, soccer fields, football fields, baseball fields, municipal parks, and golf course fairways. These Aerators utilize replaceable case hardened closed spoons mounted on weighted rotating discs, and the spoons pull cores up to 3″ in length from the soil profile every 7″ of forward travel. When filled with water these tanks provide significantly increased down pressure on the spoons. When your turf begins to suffer the effects of compaction and wear, such as shallow root zones, thatch build-up, worn pathways, hard-pack soil, poor surface percolation, or water stands, a Land Pride 25 Series Core Aerator will provide immediate seasonal relief.

Land Pride’s CA15 Series Core Aerators relieve soil compaction and allow air circulation in grassy surfaces such as lawns, soccer fields, football fields, baseball fields, municipal parks and golf course fairways. They utilize replaceable hardened spring steel spoons mounted on rotating discs. Pulled cores are deposited on the surface for subsequent drying, pulverization or removal. Weight can be added to the weight tray to help achieve maximum spoon penetration. When your turf begins to suffer the effects of compaction and wear, such as shallow root zones, thatch build-up, worn pathways, compacted soil, poor surface percolation, or water stands, a Land Pride CA15 Series Core Aerator will provide immediate seasonal relief.