B01 Series

Land Pride’s SBP11 Series Snow Blower is a 3-point-mounted model well suited for snow removal on small properties. The inverted design allows operators to back up to obstacles like buildings or fences, set the blower down, and drive away, offering the operator clear, forward visibility.

Land Pride Top & Tilt Kits add versatility to your tractor 3-point. These popular kits can be used to easily adjust the top link fore and aft and with a 3-spool kit, operators can adjust a hydraulic accessory on an implement – raise and lower hydraulic shanks for example. Top & Tilt Kits can be used to crown roads or cut a ditch by simply replacing the left mechanical linkage with a tilt cylinder allowing the operators to adjust on the fly and are especially useful with rear blades, box blades, and landscape rakes.

Land Pride offers 9 kits that include no spool valve, a two-spool valve, or a 3-spool valve, as well as a bracket for mounting the valve to the ROPs.

Land Pride’s new PR10 Series Compact Power Rake is a multi-functional tool used by landscapers, contractors, and turf care professionals. It also makes a great rental tool. The PR10 is ideal for grading, leveling, and shaping soil profiles, prepping seed beds, or raking rocks or debris.
The PR10 will angle 15° left or right manually or with an optional hydraulic angle kit. It features removable end plates, easy-adjust gauge wheels, carbide-tipped roller, and adjustable material control deflector.

Not all 3-point products are quick-hitch adaptable, especially older units of any brand. With our adjustable top hook, Land Pride’s QH16 hitch has a better chance of fitting older 3-point attachments. Look for the Quick Hitch logo to denote applicable Land Pride products. Land Pride’s 3-Point Quick-Hitch is available for a Cat. 1 hitch allowing you to easily hook on to implements, some without ever leaving the tractor seat. Optional top link is required for implements that have a floating top link. This keeps the top link attached when going through ditches.

The CB0654 Combo Bucket, or 4-n-1 Bucket, allows you to dig, drag, doze, and clamp all with a single tool. These new buckets are specifically designed for Kubota B01 Tractor and increase the versatility of the front loader. It features a single 2.5 x 6 cylinder, greaseable jaw pivot points, 30” jaw opening, and 3 hardened cutting edges. The CB0654 – for the B01 Series of tractors – is 55.5” wide, weighs just 290 lbs., and has a heaped capacity of 8.5 cu. ft. The low overall weight of these units means that the lifting capacity of the loader is not greatly diminished.

Land Pride’s SA10 Hydraulic Post Hole Digger is well suited for sub-compact tractors with lower hydraulic flow. The SA10 features a universal quick-attach mount and cradle that can be positioned for best operator visibility. The SA10 cradle easily mounts to the frame of Land Pride’s PFL12 Pallet Fork, a unique feature for customers that already own the PFL12, eliminating the need for two hitch frames. The reverse is not true: Forks will not fit the SA10 hitch frame.

Land Pride’s STB05 Series Snow Trip Blades are intended for use on Kubota BX and B01 Tractors or other sub-compact tractors with universal quick attach hitch. The STB05 has a lower profile moldboard for smaller tractors and is lighter than our STB10 Series making it more appealing for sub-compact tractor owners.

When using the loader on a compact tractor, proper ballast is essential for safe operation. Whether you refer to this attachment as a ballast box, safety box, or weight box, its purpose is the same – to keep all four tractor tires in contact with the ground. To provide this needed counterweight, the Land Pride WB10 has a 600 lb. weight capacity and can hold 4.1 cubic ft. while the the WB15 has a 800 lb. weight capacity and can hold 5.8 cubic ft.

Land Pride 3rd Function Valves are designed in conjunction with Kubota engineering to fit both ROPS and cab models.

Land Pride’s economy Pallet Fork, the PFL1242, is a 1,200 lb. capacity fork, specifically designed for sub-compact and compact tractors. The unit weighs in at just 220 lbs and forks on the model are class I, 1.25″ x 3″ x 42″. The 5-position rail allows the user to set forks in a variety of widths and are held in place by a spring-loaded toggle. For safety, the back guard is 3/16″.

Land Pride’s AG15 Series entry level Arena Graders are ideal for hobbyists and enthusiasts. The Cat 1 hitch is quick hitch compatible and ties into a 2″ x 2″ square tube frame. The end tubes are 2″ x 3″. The S-tines feature replaceable tips. Behind the two rows of S-tines is a five-position leveling bar to smooth the soil. The job is
finished with either a pipe or mesh roller to break clods and fluff the soil. The working depth is 4″ and is set by a simple ratchet handle, a Land Pride exclusive feature.

Land Pride’s RGA12 3-point Rotary Tillers are gear drive models with forward rotation, while the RGR12 Series are reverse rotation. These tillers feature Cat. 1 hitch, plate steel A-frame and 540 RPM gearbox. Both models include a 17″ diameter rotor, 6 “C” shaped tines per flange, and a 7″ tilling depth. The rotor is powered by a spur-gear drive in an oil bath with a heavy stamped drive cover. The RGA12 and RGR12 Models are designed for compact tractors up to 60 HP. Reverse tilling is not recommended for rocky soils.

Land Pride’s FM25 Series Flail Mowers are built for use in vineyards, orchards, and recreation areas. Sturdy and compact, the Land Pride FM25 has an electronically balanced rotor mounted on spherical roller bearings. The rotor is driven by a three section Powerband; spring-loaded, self-indicating belt-tensioning system makes it easy to tension belts for longer life. Three different blade options make quick work of grass, grapevine shoots, saplings, and tree prunings. (PowerBand is a Registered Trademark of the Gates Corporation.)

Land Pride GS05 Series Grading Scrapers have uses and applications in landscaping and hobby farms and are a low cost alternative for road grading applications. They do not require the additional horsepower or tending of tractor 3-point lift controls that a box scraper normally requires. Simply setting a properly adjusted GS05 Series Grading Scraper on the ground and driving forward enables the operator to grade off high spots and fill in ruts and low spots on unimproved roads and lanes with little or no manipulation of the tractor’s 3-point hitch controls. Unlike a rear blade, they require no adjustment of blade angling or offset positions.

Land Pride’s SPL10 Series Snow Pushers are available with a 24″ x 24″ box, 10 gauge moldboard, and 1/4″ sides. Both models come with optional steel or poly blade, optional pull back and replaceable skid shoes. The SPL10 skid shoes are manufactured from abrasion resistant AR400 steel.

The STB1060 & STB1072 Snow Trip Blades are designed to fit tractor loaders. The STB10 is available in 5′ and 6′ widths for tractors with loaders in the 25-40 HP range. The 10 Series Model has a 21″ curved moldboard. (Not currently available in Canada).

The Land Pride FC15 is a 3-point, 3-bar, 13-tine Field Cultivator that tackles a number of tasks in the field, including seedbed preparation, soil aeration, and weed control, just to name a few. The cultivator features 13 S-tines, or Danish tines, with reversible and replaceable tips, a Cat. 1 hitch, 2″ x 2″ square tube frame, adjustable tine spacing, and a 4″ working depth. The FC15 also features bolt on extensions to expand the working width from 72″ to 96″, an industry exclusive!

Land Pride’s FC10 is a single row 3-point Cat. 1 C-tine Field Cultivator for use by hobby farmers or gardeners. It features 6 spring steel C-tines, reversible and replaceable heat-treated tips, adjustable row spacing, and durable formed steel frame. Working width is 48″ up to 57″.

Land Pride’s BSR10 is a 3-Point Cat I or Cat II Bale Spear intended for moving bales up to 1,800 lbs. It features a single, forged 49″ steel spear with a 44″ usable length mounted to a 3″ x 3″ tube frame. To keep the bale from rolling, the BSR10 also has two replaceable 19″ stabilizer spikes.

Land Pride’s Bale Spears are available in two mounts, Universal Skid Plate and Euro, with “E” in the model name to denote the latter. These three spear models are available with an assortment of spear options and combinations of lengths. Usable spear length is 4″ shorter. Stabilizer extensions with spikes are available. Frames are constructed from 3″ x 3″ square tubes with a lifting capacity rated at up to 3,000 lbs.

Easily grasp, lift, and move a variety of materials greatly reducing the time spent on property maintenance with Land Pride’s SGC0660 Claw Grapple. The tines on the SGC06 are manufactured from high-tensile AR400 Steel making it light-weight, yet extremely durable. For additional strength, the frame is made of stout 2″ x 3″ rectangular tubing. The hinge points feature 3/4″ greaseable pins. The 9-3/8″ tooth spacing and a 32″ jaw opening make this attachment a versatile tool to help you get work done.
Land Pride also has six 3rd Function Valve Kits for a variety of Kubota tractor/loader combinations. Add versatility to your tractor by completing the package with a 3rd Function Kit.

Land owners can utilize a Land Pride WC1504 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor’s PTO, this unit features a self-feeding 4″ cutting capacity, four reversible and replaceable hardened-steel knives, adjustable discharge chute, and direct drive to rotor. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor’s output shaft, enabling the driveline to remain straight and level.

Land owners can utilize a Land Pride WC1503 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor’s PTO, this unit features a self-feeding 3″ cutting capacity, two reversible and replaceable hardened-steel knives, adjustable discharge chute, and dual B-section drive belts. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor’s output shaft, enabling the driveline to remain straight and level. *S/N 871375+ is compatible with QH05.

The Land Pride BS10 & BS20 Series Bale Spears can be attached to machines fitted with a Skid Steer adapter mounting plate, while the BSE20 Series Bale Spears can be attached to machines fitted with a Euro style adapter mounting plate. Bales can be pushed onto side dump trailers with single and double spear units. Single spear units take less force to push the spear into the bale and bales of all sizes won’t shift positions as easily while pushing the spear into the bale. Double spear units have twice the lifting capacity. The two spears spaced apart also miss the soft inner core of a bale and probe the harder outer area allowing the spears to lift a heavier bale.

The LR16 Series Landscape Rakes from Land Pride perform final soil surface preparation and reshaping soil and/or aggregate profile and offer angling capabilities to meet specific finishing needs. Optional gauge wheel packages are also available to enable a more consistent finish over uneven or undulating terrain. The LR16 offers a flip-down grader to expedite material distribution and contouring tasks. These Land Pride Landscape Rakes are perfectly suited for use by landscapers, contractors, and rental yards and have applications at housing and road construction projects, golf courses, terracing sites, run-off control projects, and reclamation and reforestation sites. *S/N 872034+ is compatible with QH05

The Land Pride HD25 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6″ to 24″ in diameter. They are available with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category 1 or 2 three-point hitch. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the three-point mounted post hole diggers.

The Land Pride RTR12 Series Reverse-Till Rotary Tillers turn the soil to prepare a seedbed for gardening or lawn seeding. With uses in both rural and non-rural applications like landscaping and gardening, the RTR12 Series offers an economical tilling solution.
The RTR12, and all Land Pride reverse rotation tillers, tends to achieve greater depth of penetration, moving and pulverizing more soil in the process, while burying residue as opposed to leaving it on top. Reverse tilling is not recommended for rocky soil. NOTE: Quick-Hitch may require a longer driveline, which is available through Land Pride Parts.

The Land Pride RTA12 Series Rotary Tillers till soil for seedbed or planting preparation with uses in both rural and non-rural applications like gardening and landscaping. The offset capabilities allow the tiller to work closer to objects such as fence lines, buildings, or trees. Operator can control the tilling depth with the adjustable skid shoes. A 15″ rotor swing diameter turns the soil over faster, and enables deep tilling action. NOTE: Quick-Hitch may require a longer driveline, which is available through Land Pride Parts.

The Land Pride RTR05 Series Rotary Tillers are sized right for subcompact tractors and are designed to till soil for seedbed preparation. They are ideal for landscaping, small nurseries, gardens, and small hobby farms.
The RTR05, and all reverse rotation tillers, tends to achieve greater depth of penetration, moving and pulverizing more soil in the process, while burying residue as opposed to leaving it on top. Reverse rotation is not recommended for rocky soil.

Land Pride’s RCR1884 Series Rotary Cutter offers an 84″ cutting width to rapidly tackle material up to 2″ in diameter for light maintenance around the farm, the pond or empty lots in the city. The cutter has a Category 1 and Category 2 three-point hitch and is Quick Hitch compatible. It is offered with a standard ASAE Category 4 driveline with slip-clutch protection and a single or dual rear laminated tailwheel.

For small acreage owners looking for a heavier cutter, Land Pride offers the RCR15 Series. It features a 2″ cutting capacity, a high blade tip speed, and larger gearbox than the RCR12. Ideal for maintenance of lanes, pastures, and other rough-cut areas.

The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1″ cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match
for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24″ stump jumper.

Land Pride’s SB10 Series Snow Blowers remove snow from driveways, parking lots, and sidewalks. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as needed. The optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. (Not currently available in Canada)

The Land Pride RB26 Series Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations. They excel in snow removal in either the pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations.Optional hydraulic angling kits are available.

The Land Pride RB16 Series Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, or property owner lanes, and roadways. They are excellent for snow removal in pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations. *S/N 872034+ is compatible with QH05.

Land Pride’s RB15 Series Rear Blades are an excellent and economical choice for applications in leveling, finish grading, and backfilling at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, and property owner lanes and roadways. The multitude of forward and reverse working angles as well as moldboard offset capability allows the operator to work right up next to retaining walls, abutments and raised curbing. They are excellent for snow removal in the pulling or push blade mode. A retractable parking stand is included to accommodate easier blade removal, storage and remount capabilities. *S/N 872034+ is compatible with QH05.

Land Pride’s RB05 Series Rear Blades are an excellent and economical choice for applications in leveling, finish grading, and backfilling at feedlots, building sites, nurseries, and maintenance operations on small farms and home sites. The RB05 is the perfect companion for your sub-compact tractor.

Land Pride’s PTS Series spin type Broadcast Spreaders offer a pull type hitch and are ground wheel driven with simple gearbox disengagement for transport. The spreaders are capable of spreading seed, sand, salt, top dressings, prilled/granular fertilizer, and many other types of granular materials. The spread rate capability and range of hopper capacities make the PTS Series Spreaders well suited for applications on farms, golf courses, food plots, park systems, athletic fields, and campuses. These units are great for control of snow and ice in commercial or small municipal applications.

Land Pride’s PFS Series pendulum-type broadcast spreaders are capable of spreading seed, top dressings, prilled/granular fertilizer, lime, and iron at delivery rates ranging from 44 to 890 lbs. per acre with a spreading width of 20′ to 46′. Optional spouts are available for narrow spreading, vineyard spreading between rows, and vineyards/orchards spreading on the rows only.

Land Pride’s line of rotary/spin type Broadcast Spreaders are capable of spreading seed, sand, salt, top dressings, lime, prilled/granular fertilizer, and most all other types of granular materials. The spread rate, capability, and range of hopper capacities make FSP Spreaders well suited for applications on farms, golf courses, food plots, park systems, athletic fields, campuses, and smaller municipal or commercial operations. They excel at spreading sand or salt for control of ice and snow.

The SP20 Series Soil Pulverizers loosen, pulverize, and level packed or encrusted soils in preparation for seeding or laying of new sod and are well suited for use by landscapers, rental yards, construction contractors, and professional turf managers. Applications include golf courses, housing developments, athletic fields, nurseries, sod farms, transportation right-of-ways, and park systems.

Land Pride’s SBR72 Seed Bed Rollers will break up smaller clumps and dirt clods, while pressing applied seed into firm contact with the soil profile for greatly improved germination rates. They are available with a 3-point hitch or pull-type, and are ideal in landscaping, sports field maintenance, pasture maintenance, professional turf care, general seeding and overseeding applications.

Land Pride’s PR16 Series Powered Rakes are a multi-functional seedbed or soil surface preparation tool for landscapers and turf care professionals, capable of grading, leveling, shaping, cultivating, renovating and pulverizing various types of soil surfaces. They are also capable of raking or windrowing soil, rocks, and construction site debris.

The Land Pride PD35 Series Post Hole Digger is designed to meet the industrial duty applications of landscapers, construction companies, nurseries, ranchers, and farmers. The PD35 is designed for Category 1 or 2 three-point attachment and offers a 48″ auger length and 9″, 12″, 15″, 18″ or 24″ auger flights with cast steel fishtail tips.

Nurseries, tree farms, landscapers, contractors, construction companies, farmers, ranchers and municipalities will find the Land Pride PD25 Series Post Hole Diggers a good fit for their heavy-duty applications. The PD25 Series is designed for Category 1 or 2 three-point attachment, offers a 48″ auger length, and a choice of 6″, 9″, 12″, 15″, 18″ or 24″ auger flights with cast steel fishtail tips.

Land Pride’s PD15 Series Post Hole Diggers are designed for Category 1 three-point attachment, offers a 48″ auger length and a choice of 6″, 9″, or 12″ auger flights with cast steel fishtail tips. Landscapers, rental yards, contractors, farmers, and ranchers will find that the PD15 meets their general duty needs and applications.

Land Pride’s PD10 Series Post Hole Digger is just right for Category 1 three-point attachment for subcompact utility tractors. This unit offers a 30″ auger length and a choice of 6″, 9″, & 12″ auger flights with cast steel fishtail tips for quick piloting and faster hole starting. Landscapers and rental yards will find this unit very effective for occasional duty and for working and maneuvering in tight spots.

Land Pride’s PFL Series Pallet Forks quickly and conveniently turn your Skid Steer loader – or Tractor loader equipped with a skid steer adapter plate – into a forklift to expand your material handling capability.

The Land Pride PF10 Series Bucket Mounted Pallet Forks have uses in farming, ranching, construction sites, nurseries, campuses, theme parks, salvage operations, warehouses, lumber yards, large or small retail outlets, and many other applications. They have the capability of turning your tractor or skid steer bucket loader into a forklift for expanded material handling capabilities. With capacities of 1000 lb. for the PF10 Series or 2000 lb. for the PF20 , you’ll find that the Land Pride Pallet Forks will save you time and money and make material handling jobs a great deal easier.

Land Pride’s LR15 Series Landscape Rakes are perfectly suited for light-duty use by landscapers and rental yards with applications at housing projects, golf courses, terracing sites, run-off control projects and restoration sites to perform final soil surface preparation and reshaping soil and/or aggregate profile. Optional dual gauge wheels are also available to enable a more consistent finish over uneven or undulating terrain.

Land Pride Grooming Mowers are a rear-mount alternative to a belly-mount mower for your sub-compact and compact tractor. With three fixed blades and a floating 3-point hitch, these mowers give you a clean cut in fescue and other turf-type grasses. The tapered rear discharge directs debris toward the ground eliminating the need for chains which provides for a more even distribution of clippings.

Land Pride’s GS15 Series Grading Scrapers have uses in applications such as landscaping, small farms and ranches, hunting camps, small acreages, and sod farms. The GS15 is extra user-friendly and a low cost alternative for road grading applications. Unlike a box scraper, they are not designed to transfer large volumes of dirt from one location to another and as a result do not require the additional horsepower that a box scraper normally requires. Nor does it require the tending of tractor 3-point lift controls to maintain grade that a box scraper might require.

Land Pride’s AFM4211 All-Flex Mower provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as fairways, parks, schoolyards, and sports fields. The AFM4211 is available with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. The contour following capability, highly productive 11′ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.

Land Pride’s DRG Series Drag Harrows are highly versatile in their design and performance. A harrow mounted on the drag bar with tines facing down and forward will deliver aggressive soil stirring action and deep penetration. Turn the harrow 180 degrees with tines facing down and to the rear and you’ll get less penetration with lighter cultivating action. Flip the harrow over with tines facing up and you get almost no cultivating action.

The Land Pride DH10 Series Disc Harrow opens and breaks up the soil surface to help prepare the soil seedbed for planting. The forward and rear gangs have aggressive notched discs to quickly break up and evenly redistribute the finely cultivated topsoil. The DH10 Series Disc Harrows have applications in landscaping, small nurseries, gardens, small hobby farms, and wild game food plots.

Land Pride’s BB25 Series Fixed Bar Box Scrapers are ideal for building sites, feedlots, outdoor arenas, and on farm and ranch lanes or roadways. Two welded braces extending from front to rear of bucket plus welded gussets between the side panels and moldboard provide exceptional strength for keeping the Box Scraper square under heavy loads. Dirt rolls off of the roll-formed moldboard while scraping, creating less drag and you will get twice the wear on the cutting edge due to its reversability.

Land Pride’s BB15 Series Fixed Bar Box Scrapers are ideal for ripping, leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, and building sites, and for maintenance operations on farm and ranch lanes or roadways. The roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper, resulting in lower HP requirements and faster working conditions while the rear backfill blade allows for backfilling trenches or along foundations.

The Land Pride BB12 Series Box Scrapers are designed for Category 1 – 3-point hitch or Quick-Hitch System mounting to tractors in the 30 hp range. These Box Scrapers are ideal for ripping, leveling, finish grading, and backfilling applications and offer forward and reverse cutting edges. The rear backfill blade allows for backfilling trenches or foundations. The stout 15-3/8″ moldboard holds its shape under heavy loads.

Land Pride’s CA25 Series Core Aerators are designed to relieve soil compaction and allow air circulation in grassy surfaces such as lawns, soccer fields, football fields, baseball fields, municipal parks, and golf course fairways. These Aerators utilize replaceable case hardened closed spoons mounted on weighted rotating discs, and the spoons pull cores up to 3″ in length from the soil profile every 7″ of forward travel. When filled with water these tanks provide significantly increased down pressure on the spoons. When your turf begins to suffer the effects of compaction and wear, such as shallow root zones, thatch build-up, worn pathways, hard-pack soil, poor surface percolation, or water stands, a Land Pride 25 Series Core Aerator will provide immediate seasonal relief.

Land Pride’s CA15 Series Core Aerators relieve soil compaction and allow air circulation in grassy surfaces such as lawns, soccer fields, football fields, baseball fields, municipal parks and golf course fairways. They utilize replaceable hardened spring steel spoons mounted on rotating discs. Pulled cores are deposited on the surface for subsequent drying, pulverization or removal. Weight can be added to the weight tray to help achieve maximum spoon penetration. When your turf begins to suffer the effects of compaction and wear, such as shallow root zones, thatch build-up, worn pathways, compacted soil, poor surface percolation, or water stands, a Land Pride CA15 Series Core Aerator will provide immediate seasonal relief.