Skip to main content

BV5160RN

Balers

For Competitive Pricing
Refer to Dealer
Extended Warranty Highest Retained Value 2022

Your hay and silage deserve the best and that’s why the Kubota BV5160RN is designed to produce the best bales. With its five belts and three rollers, this baler is efficient and precise. Net twine binding leaves you with no loose bales and with hydraulic lift and a drop floor unblocking system, you’ll move from bale to bale with the speed you’ve been searching for. Less air in your silage bales, a wider working width, and less wear and tear… it’s time to get to work and the BV5160RN is raring to go!

 
Read Disclaimer

Features & Details

SuperCut-14 Knife Rotor (SC-14 Model)

The SuperCut-14 version of BV5160 is the ideal solution for silage applications. The 14 knife chopping system provides a fast and efficient flow into the baler. With a chopping length of 2.75" it is the ideal solution for producing dense and airtight bales. Also, the bale is easier to break up during the feeding process.

Control Terminal

The ISOGO Terminal is a universal ISO control terminal which can also be used with other Kubota implements. It gives you full control of all functions from the tractor cab and is shown on a large and very clear digital display. The ISOGO terminal monitors and controls all necessary functions with all relevant parameters/ information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.

Twine Tying

Automatic twine tying with the fast acting double tube system means simultaneous binding of both edges of the bale, keeping binding time to a minimum. Over crossing of twines in the center of the bale provides no loose ends at the end of the binding cycle.

PowerBind Net Wrap

These balers come with Kubota's patented PowerBind net wrap system. This technology has allowed Kubota to get away from the old feed rollers and eliminate many high wear items. The net is fed directly into the bale chambers by injection plates. This design keeps the net tight at all times, which provides accurate and extremely reliable net injection.  In addition, the PowerBind net system is extremely simple with a very low loading height (no tools required).

Intelligent Density 3D

The Intelligent Density 3D bale chamber offers a combination of 3 rollers and 5 endless belts, giving it the ability to set the density of the bale in three different zones. The two aggressive front rollers that come in contact with the crop are constantly cleaned by scrapers and are designed to perform well in wet silage. They ensure instant and efficient bale start with immediate bale formation in all crop conditions.

Drop Floor for Easy Unblocking

The Kubota drop floor enables the operator to clear blockages easily from the tractor cab without any crop loss. Drop the floor and free the rotor blockage, engage the PTO to feed the blockage through and close the floor to continue baling. This standard feature reduces downtime and helps increase productivity.

High Performance Pick-Up and Intake

On Kubota's BV5200, the load on the tine bars is minimized by using two intermediate supports and two separate cam tracks located at either end of the pick-up. Slip clutch protection comes standard. A roller wind guard is fitted on rotor intake models which pre-compresses the crop, further boosting intake performance. The working width on the BV5200 is 86".


SPECS & COMPARE: Kubota Models

BV5160RN

High performance pickup and intake for maximum productivity.

SEE DEALERSHIP FOR PRICE
  • Length in.
    176"
  • Width in.
    99"
  • Height in.
    106"
  • Weight lbs. (kg)
    6965
  • Diameter Min in.
    24"
  • Diameter Max in.
    65"
  • Bale Width in.
    47"
  • Bale Height in.
    60"
  • Bale Formation
    5 Belts + 3 Rollers
  • Endless Belts
    Standard
  • Bale Ramp
    Standard
  • Working Width in.
    86"
  • Number of Tine Rows
    5
  • Tine Spacing in.
    2.36"
  • Windguard
    Roller wind guard
  • Pneumatic Gauge Wheel
    Standard
  • Flare to Flare Pickup
    86"
  • Lift
    Hydraulic
  • Pickup Protection
    Radial Clutch
  • Fork Feeder
    N/A
  • Protection, Cam Clutch
    N/A
  • SuperCut-14 Knives
    N/A
  • Single Knife Protection
    N/A
  • Unblocking System
    Hydraulic Drop floor
  • 1 Main Chain
    1.25"
  • 1 1/4" Main Drive Chain
    Standard
  • Wide Angle PTO Shaft
    Standard
  • Shear Bolt Protection
    N/A
  • Cam Clutch Protection
    Standard
  • Binding
    Net
  • Monitor
    IsoMatch
  • Twine
    double arm
  • ISOBUS
    Standard
  • Focus Terminal
    Standard
  • IsoMatch Tellus
    Optional
  • Hydraulic Outlets
    1SA + 1DA
  • Wheels and Axles | 11.5/80-15
    N/A
  • Wheels and Axles | 15.0/55-17
    Standard
  • Wheels and Axles | 19.0/45-17
    Optional
  • Wheels and Axles | 500/45-22.5
    Optional
  • PTO rpm
    540CV
  • PTO Protection
    CamClutch
  • Minimum PTO Horsepower Required HP/KW
    75
  • Build
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
     
  •  
§The Manufacturer's Suggested Retail Price excludes tax, dealer fees, and optional equipment. The equipment shown is for illustrative purposes only and may not be base equipment.

SPECIAL OFFERS

KUBOTA BV SERIES

NEW HAY TOOLS PURCHASE SPECIAL OFFERS

0% A.P.R.
for 48 Months With 0% Down plus $2,500 loyalty cash reward**

VIEW DETAILS
OFFER ENDS 06/30/2024

FARMER VETERAN COALITION MEMBER REBATE

CUSTOMER INSTANT REBATE FOR FARMER VETERAN COALITION MEMBERS1

VIEW DETAILS
OFFER ENDS 12/31/2024

KUBOTA STAND ALONE FINANCING INSTALLMENT PROGRAM

Stand Alone Financing Installment Program3

VIEW DETAILS
OFFER ENDS 12/31/2024

FIND A PART

Keep your Kubota running like new with Kubota Genuine parts. KUBOTA PARTS LOOKUP

FIND A DEALER

Please enter a valid city, state or ZIP code